milestogo
07-22 04:53 PM
any inputs....?
wallpaper lionel messi wallpaper 2011
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
bachelor
09-24 08:08 AM
Hi All
I just saw the USCIS GC approval email notice - EB2-I - Dec 20'th 2005 Priority Date
I have same issue as few others have. I'm not married yet. I have applied for GC and luckily the GC has been approved (when I really don't want it to be approved). ... Trust me I was praying god all the time.
My priority date is EB2-I Dec 20'th 2005 and god knows how they approved it much before every one else. When all others really want their GC's.
There are lots people who are in queue with Jan 2004 and later priority dates and whose cases are still pending... How could they approve my case so soon...
I have scheduled for a travel to India on August 15'th 2008 to get married. I wanted to marry and get my wife to USA. I 'm engaged with girl at India and all set for marriage this month (August 2008).
I believe my H1-B has been automatically canceled on immediate approval of GC.
How do I get my future wife to USA?. What are the options left out to me now?.
Please excuse me if this is a duplicate thread. I'm really in hurry and could not check all threads properly.
--Suresh
Hi Suresh,
I'm in the same situation as you are in.. Can you please let me know which option did you choose?..
Thanks in advance.
I just saw the USCIS GC approval email notice - EB2-I - Dec 20'th 2005 Priority Date
I have same issue as few others have. I'm not married yet. I have applied for GC and luckily the GC has been approved (when I really don't want it to be approved). ... Trust me I was praying god all the time.
My priority date is EB2-I Dec 20'th 2005 and god knows how they approved it much before every one else. When all others really want their GC's.
There are lots people who are in queue with Jan 2004 and later priority dates and whose cases are still pending... How could they approve my case so soon...
I have scheduled for a travel to India on August 15'th 2008 to get married. I wanted to marry and get my wife to USA. I 'm engaged with girl at India and all set for marriage this month (August 2008).
I believe my H1-B has been automatically canceled on immediate approval of GC.
How do I get my future wife to USA?. What are the options left out to me now?.
Please excuse me if this is a duplicate thread. I'm really in hurry and could not check all threads properly.
--Suresh
Hi Suresh,
I'm in the same situation as you are in.. Can you please let me know which option did you choose?..
Thanks in advance.
2011 Lionel Messi Wallpapers
desi_voice
04-16 03:07 PM
They do not accept Indian 3 yr bachelors & 2/3years of Masters + 5 years for EB2. This has been discussed lot of times. They expect single 4 year degree.
15yrs of education(India Bachelors) + 5 or more years of education for EB3 is accepted if certain qualifiers are included in the Labor.
Just take care if you are dealing with attorney who saying above thing.
Hi number30,
I know many of my friends who have Indian 3 yr bachelors & 2/3years of Masters + 5 years experience post education applied in EB2 and got I-140 approved and many of them got their GC too.
15yrs of education(India Bachelors) + 5 or more years of education for EB3 is accepted if certain qualifiers are included in the Labor.
Just take care if you are dealing with attorney who saying above thing.
Hi number30,
I know many of my friends who have Indian 3 yr bachelors & 2/3years of Masters + 5 years experience post education applied in EB2 and got I-140 approved and many of them got their GC too.
more...
pappu
10-29 08:49 AM
-
- Any advice for everyone?
knowledge, knowledge and knowledge! The earlier- the better.
Greatest disappointment that haven't discovered IV back then, say in 2001:D
Very true.
Lack of awareness and information is a big problem. Starting the process early is better. I have seen some people undecided about GC and waiting till the end of H1B to start. It is at that time they discover retrogression. Some discover retrogression only after 140 approval. Until then they are not even aware of IV.
- Any advice for everyone?
knowledge, knowledge and knowledge! The earlier- the better.
Greatest disappointment that haven't discovered IV back then, say in 2001:D
Very true.
Lack of awareness and information is a big problem. Starting the process early is better. I have seen some people undecided about GC and waiting till the end of H1B to start. It is at that time they discover retrogression. Some discover retrogression only after 140 approval. Until then they are not even aware of IV.
onemorecame
08-10 12:42 PM
Yes, I did use LS.
But my motive was not to jump the line as I told my company attorney to purposefully find an LC from this year or last year. And since it was a multibillion dollar company with some xx thousand employees. They were able to find one.
Not everyone's motives is to jump the line. I did this because I didnt want to wait another 10 years to apply for I 485.
And on the top, dont even think that all who did LS were able to jump the line. LS involves lot of scrutiny and it was always safer to use one's own labor.
Its so funny that some people think that people who cannot prove themselves for what ever reasons (education etc) with their own labor use LS. hehehe. This is even more riskier.
And it was always legal to do it. And may be many people and employers misused it. Shout at those people.
As for me, my labor was going nowhere and the company with which I worked for the past few years found an LS for me which was from last year PD and I do not regret doing it.
And I bet, people who had an opportunity like me would do it.
And also, THE THREAD WAS NOT OPENED WITH A TITLE "WHAT IS YOUR OPINION ABOUT LS, SHOULD IT BE BANNED". There were a number of threads on this forum where you can show these kinds of opinions. This thread was opened for a different purpose.
And moveover LS is banned now. So dont waste your energyy but use it for some good causes IV is planning for.
Hi
I think you did good job that you accepted LS from your company.
I never used LS even though it was available at that time. But I don't hate who accepted this LS, I know it was legal and it�s for the company who can utilize their labor instead for waiting for approval of another labor.
I would like to say people who hate thus who used LS because they missed this or they never got chance to get LS, or they never had that much dare to pay the money and get that.
Dude nobody is "DHARMATMA" here. And don�t try to show that you are clean.
So please stop this non-sense and hating people who used LS. Just give your suggestion on post if anybody is looking for any suggestion. Otherwise just ignore it.
Thanks to all:)
onemorecame
But my motive was not to jump the line as I told my company attorney to purposefully find an LC from this year or last year. And since it was a multibillion dollar company with some xx thousand employees. They were able to find one.
Not everyone's motives is to jump the line. I did this because I didnt want to wait another 10 years to apply for I 485.
And on the top, dont even think that all who did LS were able to jump the line. LS involves lot of scrutiny and it was always safer to use one's own labor.
Its so funny that some people think that people who cannot prove themselves for what ever reasons (education etc) with their own labor use LS. hehehe. This is even more riskier.
And it was always legal to do it. And may be many people and employers misused it. Shout at those people.
As for me, my labor was going nowhere and the company with which I worked for the past few years found an LS for me which was from last year PD and I do not regret doing it.
And I bet, people who had an opportunity like me would do it.
And also, THE THREAD WAS NOT OPENED WITH A TITLE "WHAT IS YOUR OPINION ABOUT LS, SHOULD IT BE BANNED". There were a number of threads on this forum where you can show these kinds of opinions. This thread was opened for a different purpose.
And moveover LS is banned now. So dont waste your energyy but use it for some good causes IV is planning for.
Hi
I think you did good job that you accepted LS from your company.
I never used LS even though it was available at that time. But I don't hate who accepted this LS, I know it was legal and it�s for the company who can utilize their labor instead for waiting for approval of another labor.
I would like to say people who hate thus who used LS because they missed this or they never got chance to get LS, or they never had that much dare to pay the money and get that.
Dude nobody is "DHARMATMA" here. And don�t try to show that you are clean.
So please stop this non-sense and hating people who used LS. Just give your suggestion on post if anybody is looking for any suggestion. Otherwise just ignore it.
Thanks to all:)
onemorecame
more...
sledge_hammer
07-07 08:57 AM
I wonder how someone can add amnesia on others? :confused:
Guys, stop insulting each other. There is no need to add misery and amnesia on each other. I am sure we will all reach our destiny in the end. Just make the journey courteous and smooth.
Guys, stop insulting each other. There is no need to add misery and amnesia on each other. I am sure we will all reach our destiny in the end. Just make the journey courteous and smooth.
2010 Lionel Messi Football Players
pappu
03-26 12:47 PM
I sent an email about 2 weeks back to sanjay and I still have not recd any documents that I need to schedule my appointments and what I need to talk about. Please send me an email or PM to give me the guidance.
Thanks from Michigan
Sanjay or Varsha will get in touch with you.
Thanks from Michigan
Sanjay or Varsha will get in touch with you.
more...
nrk
10-27 08:48 AM
landed in US with h1b visa, moved another job using EAD. never been out of status
Have you ever been illegal?
Have you ever been illegal?
hair lionel messi wallpaper hd.
psam
04-22 11:31 PM
I doubt this law will cause any trouble. For analogy, there are laws around carrying current insurance papers. Once I didnt have my current insurance, since every six months new ones get mailed and I forgot to keep them in the car. I showed the police officer my previous expired insurance and mentioned that the insurance-id is the same. He accepted it and asked me to carry the current copy in future.
more...
raamskl
07-31 09:29 AM
I don't know anything else about these cases, was checking randomly and I see cases filed for 5th and 11th have updates.
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++
Receipt Number: lin07XXXXXXXXXXXX
Application Type: I485, APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS
Current Status: Case received and pending.
On July 5, 2007, we received this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS, and mailed you a notice describing how we will process your case. Please follow any instructions on this notice. We will notify you by mail when we make a decision or if we need something from you. If you move while this case is pending, call customer service. We process cases in the order we receive them. You can use our processing dates to estimate when yours will be done. This case is at our NEBRASKA SERVICE CENTER location. Follow the link below to check processing dates. You can also receive automatic e-mail updates as we process your case. Just follow the link below to register.
====================================
Receipt Number: lin072XXXXXXXX
Application Type: I485, APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS
Current Status: Case received and pending.
On July 11, 2007, we received this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS, and mailed you a notice describing how we will process your case. Please follow any instructions on this notice. We will notify you by mail when we make a decision or if we need something from you. If you move while this case is pending, call customer service. We process cases in the order we receive them. You can use our processing dates to estimate when yours will be done. This case is at our NEBRASKA SERVICE CENTER location. Follow the link below to check processing dates. You can also receive automatic e-mail updates as we process your case. Just follow the link below to register.
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++
Receipt Number: lin07XXXXXXXXXXXX
Application Type: I485, APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS
Current Status: Case received and pending.
On July 5, 2007, we received this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS, and mailed you a notice describing how we will process your case. Please follow any instructions on this notice. We will notify you by mail when we make a decision or if we need something from you. If you move while this case is pending, call customer service. We process cases in the order we receive them. You can use our processing dates to estimate when yours will be done. This case is at our NEBRASKA SERVICE CENTER location. Follow the link below to check processing dates. You can also receive automatic e-mail updates as we process your case. Just follow the link below to register.
====================================
Receipt Number: lin072XXXXXXXX
Application Type: I485, APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS
Current Status: Case received and pending.
On July 11, 2007, we received this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS, and mailed you a notice describing how we will process your case. Please follow any instructions on this notice. We will notify you by mail when we make a decision or if we need something from you. If you move while this case is pending, call customer service. We process cases in the order we receive them. You can use our processing dates to estimate when yours will be done. This case is at our NEBRASKA SERVICE CENTER location. Follow the link below to check processing dates. You can also receive automatic e-mail updates as we process your case. Just follow the link below to register.
hot Tags: lionel messi argentina
paskal
06-24 07:18 PM
I learned that the full committee meeting was scheduled for June 23rd (yesterday). Was it dropped or rescheduled?? Can you give that piece of information?
Folks,
I do not have any update on any meeting right now...I'm sure that once something becomes available, we will all hear...!
Folks,
I do not have any update on any meeting right now...I'm sure that once something becomes available, we will all hear...!
more...
house Lionel Messi WallPapers IV for
hydboy77
06-02 06:30 PM
what the heck happenned. The text has completely changed since I voted. When I voted it clearly stated the unused visas would be recaptured for family based and employment based immigrants. now it only says for family based immigrants. Have we (employment based) been shafted, is visa recapture for us Eb immigrants or not?
tattoo Tags: lionel messi argentina
kviswanathan
08-06 06:19 PM
My case
PD:April 5 2004
RD:July 2 2007
ND : Sept 10 2007
I140 Approval: Feb 15, 2007
Status: Pending
Service Center: NSC
PD:April 5 2004
RD:July 2 2007
ND : Sept 10 2007
I140 Approval: Feb 15, 2007
Status: Pending
Service Center: NSC
more...
pictures lionel messi wallpaper 2010.
LostInGCProcess
10-29 09:40 AM
So much for so called "highly skilled". Young guys out there, in their 20s....think twice about making America your permanent home. Right now, it is very discouraging.
It is sad. When you call USCIS to get some information, its almost like we are hitting against an Iron wall. They dont give out any information except read from a standard text. They could as well have some automated machine to read those out.
I just want to know if there is an official explanation for the delay in EAD renewal from USCIS. Wonder why it takes that long when they already have all our 'janamkundli' with them.
It is sad. When you call USCIS to get some information, its almost like we are hitting against an Iron wall. They dont give out any information except read from a standard text. They could as well have some automated machine to read those out.
I just want to know if there is an official explanation for the delay in EAD renewal from USCIS. Wonder why it takes that long when they already have all our 'janamkundli' with them.
dresses Wallpaper of Lionel Messi,
NYC001
03-16 12:32 PM
http://abclocal.go.com/kgo/story?section=politics&id=3998727&ft=print
more...
makeup lionel messi wallpaper 2011
BharatPremi
11-07 02:00 PM
I received my AP on Nov 3 and looking at the AP doc it had an approval date of Oct 10 whereas I had "Document mailed to applicant" message on Oct 31.
I am not sure what happened between Oct 10 and Oct 31st.
I am sure nothing happened between that period to your papers except eating dust in USCIS mailroom.
I am not sure what happened between Oct 10 and Oct 31st.
I am sure nothing happened between that period to your papers except eating dust in USCIS mailroom.
girlfriend lionel messi wallpaper 2011
yabadaba
05-22 03:04 PM
seriously...quit your job and work at a gas station for a few months...u will be all set
hairstyles lionel messi wallpaper 2011
yabadaba
12-28 11:19 AM
how do I avoid that scenario?
If I send some information to USCIS that I am invoking AC 21, they would not allow my employer to revoke I 140?
as far as i know, you cannot avoid that scenario of the employer withdrawing I-140. You can speak to them, but there is no way you can guarantee what they do. Your boss may agree but ur corp lawyers or HR may have different ideas.
just make sure u document everything including ur ac21 request to uscis. mayke sure u have an attorney on record who will file ur ac21...if u want to be supersafe.
as long as u have the documentation and correct letters from your company, even if they have a rfe on ur case, u can provide documentation...if they issue a noid or deny ur petition, ur lawyer can help u file a mtr (motion to reopen/reconsider) and resolve it for u.
i am not speaking from personal experience but from what i have been reading on the forums for a few years now.
on the plus side u will have hundred if not thousands of ppl invoking ac21 in the next few days...so uscis will be well aware of the law, clauses, etc when it comes time to adjudicate urs.
If I send some information to USCIS that I am invoking AC 21, they would not allow my employer to revoke I 140?
as far as i know, you cannot avoid that scenario of the employer withdrawing I-140. You can speak to them, but there is no way you can guarantee what they do. Your boss may agree but ur corp lawyers or HR may have different ideas.
just make sure u document everything including ur ac21 request to uscis. mayke sure u have an attorney on record who will file ur ac21...if u want to be supersafe.
as long as u have the documentation and correct letters from your company, even if they have a rfe on ur case, u can provide documentation...if they issue a noid or deny ur petition, ur lawyer can help u file a mtr (motion to reopen/reconsider) and resolve it for u.
i am not speaking from personal experience but from what i have been reading on the forums for a few years now.
on the plus side u will have hundred if not thousands of ppl invoking ac21 in the next few days...so uscis will be well aware of the law, clauses, etc when it comes time to adjudicate urs.
kumsoft
08-01 12:49 PM
My I-140 approved from TSC and I-485 submitted to NSC on July 2nd 7:55am. I talked to 2 immigration officer today morning. They informed me my case would be transfered to TSC. I dont know if NSC would receipt my application:confused:
Lasantha
12-26 02:51 PM
EB2 visa numbers are not given to EB2... Are those number given to EB3 ROW ?
Did you mean "EB2 ROW Unused visa numbers are not given to EB2 India and China... Are those number given to EB3 ROW ?"
the bold text is my addition. If that's your question, I am curious about that too.
Did you mean "EB2 ROW Unused visa numbers are not given to EB2 India and China... Are those number given to EB3 ROW ?"
the bold text is my addition. If that's your question, I am curious about that too.
No comments:
Post a Comment